ELEGRP Motion Sensor Light Switch without Neutral Wire, 120° Sensor Coverage, UL Listed

【ELEGRP Brand】Professional Dimming Solutions for Every Home

ELEGRP brand believes in adopting a consumer-centric and efficient problem-solving approach to provide friendly solutions. In the future, ELEGRP will continuously go above and beyond in electrical safety use and smart home appliance to meet the ever-changing demand of our consumers. We will constantly make explorations and innovations.

Product Options: -Rocker Dimmers -Toggle Dimmers -Smart Light Controls -Smart Rotary Dimmers -Smart Outdoor Dimmer Plug -Motion Sensor Switches -Light Switches -Dimmers

Visit our store for more options: -Smart Series -Sensor and Smart Series -Standard Light Switch

Product Description:

NOTES TO BUY: -Please ensure that your home has a ground wire and that it is functioning properly. -This product can be used as a single-pole control and is not suitable for 2 location & 3-way circuits. -Works with 300W LED, 300W CFL, and 600W incandescent light bulbs available in the market. -Please make sure not to connect the hot and load wires in reverse.

INNOVATIVE PIR TECHNOLOGY: The ELEGRP motion sensor switch utilizes passive infrared (PIR) detection technology with a segmented Fresnel lens to monitor a room for occupancy. This specialized lens divides the field of view into sensor zones. When a person enters or exits a sensor zone, the sensor detects motion and turns on the lights. If the sensor detects human motion before the set time delay elapses, it will reset for another cycle before automatically turning off the lights. If the sensor switch keeps being triggered by human motions, it will keep the light on until the time delay elapses and no human motion is detected, or until manually switched off.

Features: -Adjustable 120-degree field of view with optional sensitivity adjustments. -Compatible with 300W LED, 300W CFL, and 600W incandescent light bulbs. -Extremely low standby power consumption. -Made of flame-resistant material reaching the highest grade of 5VA. -UL & CUL listed.

MULTIPLE SETTING MODES: -OCC Mode: Automatic ON & Automatic OFF Set the delay time and sensor sensitivity as desired. Set light sensitivity to desired levels. The device will automatically turn on the lights when motion is detected and turn them off when the time delay elapses.

-VAC Mode: Manual ON & Automatic OFF Set the delay time and sensor sensitivity as desired. Set light sensitivity to disable automatic ON function. The device will only turn on the lights manually and turn them off automatically when the time delay elapses.

120° SENSOR COVERAGE: Note: -Ensure there are no large furniture obstructing the installation of the product. -Install the sensor switch about 4 feet from the floor for optimal performance. -Hot objects or moving air currents can affect the sensor's performance. -The sensor requires an unobstructed view of room occupants to detect motion. -The inside LED indicator will flash when human motion is detected.

The motion sensor switch provides an adjustable 120-degree field of view with optional sensitivity, ambient light override, and delayed off time. It detects motion in areas up to 900 square feet and up to 35 feet from the sensor, making it ideal for various locations such as porches, closets, garages, hallways, stairs, basements, pantries, and laundry rooms.

Important FAQ: 1. Q: My house doesn't have a ground wire, can I use the neutral wire instead? A: No, this motion sensor switch requires an effective ground wire. Please check your house before ordering. The neutral wire is not required for connection.

1. Q: I connected all the wires, including the ground wire, but the switch is not working. Is it faulty? A: There may be two reasons: 1) The hot and load wires are reversed. Please reverse the black and red wiring of the sensor switch. 2) The ground wire is not properly connected or is ineffective. Please consult a professional electrician.

2. Q: How do I know if the wiring is correct or not? A: Check if the LED indicator inside the motion sensor switch flashes when you approach it: 1) If it does, it means the wiring is correct. 2) If it doesn't, it means the switch is falsely wired or ungrounded. Please rewire the sensor switch. If the LED still doesn't flash, it is likely due to an ineffective ground wire. Consult a professional electrician.

Customer Reviews: -4.3 out of 5 stars (5,315 reviews) -4.3 out of 5 stars (2,433 reviews) -4.0 out of 5 stars (64 reviews) -4.3 out of 5 stars (307 reviews) -4.2 out of 5 stars (218 reviews)

Price: -$15.99 -$16.99 -$34.99 -$22.99 -$16.99

Specifications of the different products are provided in the table.

【NOTES TO BUY】 -Grounding Wire is Required. The device will not function if it is not grounded or the ground wire does not work. Use the ground wire in the wall box for ground connection. If no ground is available, consult an electrician.

product information: