Dual Load Motion Sensor Switch for Occupancy & Vacancy Modes

The TOPGREENER TDOS5-JD Motion Sensor Switch is a dual load sensor switch that can control two fixtures simultaneously, making it ideal for controlling a light and fan or other dual load applications. This easy-to-install wall switch can automate a light and fan based on the motion detected in a room, featuring three modes: Dual Occupancy (OCCD), Single Occupancy (OCCS), and Dual Vacancy (VACD).

In the default OCCD mode, both connected loads will be automatically turned ON when you enter a room and automatically turned OFF when the room is vacant. OCCS mode operates similarly, but it only applies the feature to the primary load. Alternatively, VACD mode requires both loads to be turned ON manually, but they will shut OFF automatically after the room is vacant for a preselected amount of time, which can be easily adjusted from 15 seconds up to 30 minutes.

The device's Passive Infrared (PIR) sensor has a 180° field of view and a max detection range of 40 ft in front and up to 20 ft on each side. The sensor's detection range can be set to 30%, 65%, or 100% of the maximum range, and it is best suited for spaces up to 1200 sq ft. For optimal performance, the sensor should be installed between 4-5 ft high and away from obstructions.

Both loads can also be turned ON/OFF manually with the press buttons on the face of the switch. The programming controls, including the sensor range dial, time delay dial, and mode switch, are located under the face cover of the device.

This motion-sensing wall switch is ideal for rooms that you enter with your hands full, such as an entryway, closet, laundry room, garage, kitchen, or bathroom. It helps conserve energy and lower power bills by ensuring the light or fan is never left on by mistake.

The TOPGREENER TDOS5-JD Motion Sensor Switch is UL listed and compliant with Title 20 & 24 requirements. It features a white color, residential/commercial grade construction, and dimensions of 2.5" W x 4.5" H x 2.5" D. It operates on 120/277VAC@60Hz and has a max rating of 800W incandescent/halogen, 150W LED/CFL, and 1/4HP motor. The device's operating temperature range is 32-131ºF, and it requires a ground wire but no neutral wire.

product information: